Synthesis of ZnO/Au Nanocomposite for Antibacterial Applications.

Annually, antimicrobial-resistant infections-related mortality worldwide accelerates due to the increased use of antibiotics during the coronavirus pandemic and the antimicrobial resistance, which grows exponentially, and disproportionately to the current rate of development of new antibiotics. Nanoparticles can be an alternative to the current therapeutic approach against multi-drug resistance microorganisms caused infections. The motivation behind this work was to find a superior antibacterial nanomaterial, which can be efficient, biocompatible, and stable in time. This study evaluated the antibacterial activity of ZnO-based nanomaterials with different morphologies, synthesized through the solvothermal method and further modified with Au nanoparticles through wet chemical reduction. The structure, crystallinity, and morphology of ZnO and ZnO/Au nanomaterials have been investigated with XRD, SEM, TEM, DLS, and FTIR spectroscopy. The antibacterial effect of unmodified ZnO and ZnO/Au nanomaterials against Escherichia coli and Staphylococcus aureus was investigated through disc diffusion and tetrazolium/formazan (TTC) assays. The results showed that the proposed nanomaterials exhibited significant antibacterial effects on the Gram-positive and Gram-negative bacteria. Furthermore, ZnO nanorods with diameters smaller than 50 nm showed better antibacterial activity than ZnO nanorods with larger dimensions. The antibacterial efficiency against Escherichia coli and Staphylococcus aureus improved considerably by adding 0.2% (w/w) Au to ZnO nanorods. The results indicated the new materials' potential for antibacterial applications.

Self-activated pyrolytic synthesis of S, N and O co-doped porous carbon derived from discarded COVID-19 masks for lithium sulfur batteries

The continuous spread of COVID-19 has produced a large number of abandoned disposable medical masks (DMMs), which have a greater negative impact on the environment and biosafety. In response to this issue, a method for rapid microwave sulfonation, nitrification and oxidation of DMMs was proposed to convert DMMs with low carbonization efficiency into aromatic carbon with good thermal stability, which not only maintained 51 wt.% of initial mass at 1000 °C, but also achieved in situ co-doping of S, N and O. Subsequently, porous carbons derived from DMMs were synthesized by self-activation pyrolysis, which avoided consumption of alkali and metal salts in the traditional activation process. It was further found that low pyrolysis temperature was not enough to produce enough active material H2 and H2O to obtain high specific surface area, while increasing pyrolysis temperature could adjust the specific surface area of as-prepared carbon, ranging from 52 m2·g−1 to as high as 890 m2 g−1. Thanks to synergistic effect of S, N, and O co-doping and hierarchical porous structure, the first discharge specific capacity of sample synthesized by self-activated pyrolysis at 900 °C was 1459.8 mAh·g−1 at 0.1 C, and the discharge specific capacity retention at 0.5 C after 400 cycles was 52.3%.

Ultrasensitive and highly selective "turn-on" fluorescent sensor for the detection and measurement of melatonin in juice samples.

Melatonin (MLT), a hormone related to the regulation of brain functions, is directly related to sleep quality and is considered to be a possible adjuvant therapy for patients needing hospitalization for coronavirus disease 2019 pneumonia, and accurate measurement of MLT is crucial. Herein, a new, highly sensitive, and easy operation fluorescent probe was provided based on Zr metal-organic framework encapsulation into the molecularly imprinted polymer (MOF@MIP). By combining unique properties of MIP and fluorescent MOF, selectivity and operation of the applied method were significantly improved. Different characterization methods, such as XRD, FT-IR, and FE-SEM, were used to confirm the synthesis reliability. MOF@MIP was successfully used for the precise identification and ultrasensitive detection for trace amounts of MLT. The detection mechanism for the analytical system is based on the ''turn-on'' fluorescence (FL) signal in 404 nm. The findings proved that it is possible to detect trace amounts of MLT in real samples including grape, cherry, and sour cherry juice. The linear range and the limit of detection (LOD) for trace amounts of MLT were obtained as 1-100 ng/mL and 0.18 ng/mL, respectively.

Porous carbon materials derived from discarded COVID-19 masks via microwave solvothermal method for lithium­sulfur batteries.

With the spread of COVID-19, disposable medical masks (DMMs) have become a significant source of new hazardous solid waste. Their proper disposal is not only beneficial to the safety of biological systems but also useful to achieve considerable economic value. The first step of this study was to investigate the chemical composition of DMMs. It is primarily composed of polypropylene, polyethylene terephthalate and iron, with fibrous polypropylene accounting for approximately 80% of the total weight. Then, DMMs were sulfonated and oxidised by the microwave-driven concentrated sulfuric acid within 8 min based on the fact that the concentrated sulfuric acid exhibits a good microwave absorption capacity. The co-doping of sulfur and oxygen was achieved while improving the thermal stability of DMMs. Subsequently, the self-activation pyrolysis of sulfonated and oxidised DMMs (P-SO@DMMs) was further realized in low-flow-rate argon. The specific surface area of P-SO@DMMs increased from 2.0 to 830.9 m2·g-1. P-SO@DMMs sulfur cathodes have promising electrochemical properties because of their porous structures and the synergistic effect of sulfur and oxygen co-doping. The capacity of the samples irradiated by microwave for 10 min at 0.1, 0.2, 0.5, 1, 2 and 5 C were 1313.6, 1010.9, 816.5, 634.4, 513.4 and 453.1 mAh·g-1, respectively, and after returning to 0.2 C and continuing the cycle for 50 revolutions, maintained 50.5% of the initial capacity. After 400 cycles, its capacity is 38.1% of the initial capacity at 0.5 C. It is slightly higher than the electrochemical performance of the sample treated by microwave for 8 min and significantly higher than the sample treated by 6 min. This work converts structurally complex, biohazardous DMMs into porous carbon with high specific surface area by clean and efficient microwave solvothermal and self-activating pyrolysis, which facilitates the development of carbon based materials at low cost and large scale.